Drawmer MX30 Rack Compressor - image 1
Drawmer MX30 Rack Compressor - image 2
Drawmer MX30 Rack Compressor - image 3
Drawmer MX30 Rack Compressor - image 4
Drawmer MX30 Rack Compressor - image 5
Drawmer MX30 Rack Compressor - image 6
Drawmer MX30 Rack Compressor - image 7
Drawmer MX30 Rack Compressor - image 8
Sold

Drawmer - Spares & Parts

Drawmer MX30 Rack Compressor

£99.99
Browse similar products

Free UK delivery by 4 - 6 Oct

Visa Mastercard American Express Apple Pay Klarna

THERE IS ONLY ONE.

Free Express UK delivery 30-day returns Quality assured

About the Drawmer MX30 Rack Compressor

Fully tested, in good condition with some scratches and discolouration to case. With Power cable.

The Drawmer MX30 is a two-channel line-level rack compressor with limiter and gate, designed for musicians, project studios, and live engineers. It is a professional quality dynamics processor with automated features enabling fast, effective dynamic control.

Key Features:

  • Dual gated compressor limiter with separate gate, compressor, and peak limiter for each channel
  • Variable threshold for adjusting sensitivity, and two fixed release speeds for processing fast or sustained sounds
  • Auto compressor with variable threshold and ratio, soft knee, and automatic attack and release
  • Output section with make-up gain to apply to compressed audio
  • Peak limiter section to prevent distortion
  • Master link switch for stereo or dual mono modes
  • Fuse rating: T32mA for 230V, T63mA for 115V, conforming to IEC 127-2

Specifications:

  • Input Impedance: 20k Ohms, 4k Ohms
  • Maximum Input Level: +21dBu
  • Output Impedance: 50 Ohms, 100 Ohms
  • Maximum Output Level: +20dBu
  • Frequency Response: <10Hz to 36KHz @-1dB
  • Signal-to-Noise Ratio: <100dB @ 1kHz, <0.02% @ 1kHz 0dB
  • Power Consumption: 9VA @ 230Volt or 115V at 50-60Hz

General

BrandDrawmer
ModelDrawmer MX30 Rack Compressor
CategorySpares & Parts
ConditionGood

Condition

This item has been inspected and set up by our workshop. Every item is a single, one-off piece, photographed as it is so you know exactly what you are buying.

Condition guide

Our inspection process

  • 01

    Workshop inspection

    Checked by a specialist, not just a technician. Body, hardware and cosmetics visually assessed for wear, damage and authenticity.

  • 02

    Function tested

    Controls, connections and electronics tested at the bench to confirm everything works as it should.

  • 03

    Prepared for use

    Cleaned and set up where needed so it arrives ready to use straight out of the box.

  • 04

    Photographed & documented

    Every angle, mark and detail captured in high resolution so you know exactly what you are buying.

  • 05

    Double-boxed dispatch

    Re-checked before packing, then carefully packed and sent tracked and signed-for.

4.9
211 reviews onGoogle

"Buying was very quick and easy, delivery was confirmed a few hours later and was fully tracked and on time. Highly recommended!"

Matthew Williams

Bought a subwoofer

"Great to deal with. Quick responses and fair pricing on my old Marshall amp."

Anthony Hinkley

Sold a Marshall amp

"No hassle selling equipment, good service throughout the entire process."

Blair Trowbridge

Sold studio gear

After you buy

  1. 01

    Order placed

    Payment confirmed instantly. You'll get an email receipt and tracking link to follow.

  2. 02

    Workshop pack

    We re-check the inspection, photograph the packing, and carefully box for safe transit.

  3. 03

    Tracked dispatch

    Signed-for courier across the UK. Most orders arrive within 2 working days.

  4. 04

    30-day returns

    Not the one for you? Send it back within 30 days for a full refund.

GET IT NOW

There is only one. Free express UK delivery, 30-day returns, and our quality assurance behind every order.

Got gear to trade?

Free collection, same-day payment, and fair prices backed by expert valuations. No fees, no hassle.

Drawmer

Drawmer MX30 Rack Compressor

£99.99Browse similar